Sigma As 227 Programming
Sigma As 227 Programming https://fancli.com/2tuHWs
How to Program a Sigma As 227 LED Display
A Sigma As 227 LED display is a versatile device that can show text, graphics, and animations in red and bright red colors. It can be programmed via PC or remote control, and it has 24 transition effects and 7 different fonts to choose from. It can store up to 99 messages and 7000 characters in its memory, and it can display international symbols and pre-made graphics. In this article, we will show you how to program a Sigma As 227 LED display using both methods.
Programming via PC
To program a Sigma As 227 LED display via PC, you will need the following accessories:
A RS232 cable to connect the display to your computer.
A AC/DC adaptor to power the display.
A CD-ROM with the software for AS227.
Follow these steps to program your display via PC:
Install the software for AS227 from the CD-ROM on your computer.
Connect the RS232 cable to the display and your computer.
Connect the AC/DC adaptor to the display and plug it into a power outlet.
Turn on the display using the switch on the back.
Open the software for AS227 on your computer.
Enter your password if prompted. The default password is 1234.
Create a new message or edit an existing one using the software interface.
Select the font, color, speed, delay, and effect for your message.
Add symbols, graphics, or animations if desired.
Click on \"Send\" to transfer your message to the display.
Repeat steps 6-10 for any other messages you want to program.
Programming via Remote Control
To program a Sigma As 227 LED display via remote control, you will need the following accessory:
A remote control that comes with the display.
Follow these steps to program your display via remote control:
Turn on the display using the switch on the back.
Press \"Menu\" on the remote control to enter the programming mode.
Select \"New\" or \"Edit\" to create a new message or edit an existing one.
Use the arrow keys and the \"Enter\" key to input your message using the alphanumeric keypad on the remote control.
Press \"Font\" to select the font for your message.
Press \"Color\" to select the color for your message.
Press \"Speed\" to select the speed for your message.
Press \"Delay\" to select the delay for your message.
Press \"Effect\" to select the effect for your message.
Press \"Symbol\" to add symbols to your message.
Press \"Graphic\" to add graphics to your message.
Press \"Animation\" to add animations to your message.
Press \"Save\" to save your message in the memory of the display.
Repeat steps 3-13 for any other messages you want to program.
Displaying Your Messages
Once you have programmed your messages, you can display them on the Sigma As 227 LED display. You can use the remote control or the software for AS227 to select which messages to display and in what order. You can also set a timer to schedule when your messages will be displayed.
Displaying Your Messages via Remote Control
To display your messages via remote control, follow these steps:
Press \"Menu\" on the remote control to exit the programming mode.
Press \"Play\" to start displaying your messages.
Press \"Pause\" to pause displaying your messages.
Press \"Stop\" to stop displaying your messages.
Press \"Next\" or \"Previous\" to skip to the next or previous message.
Press \"Timer\" to set a timer for your messages.
Displaying Your Messages via PC
To display your messages via PC, follow these steps:
Open the software for AS227 on your computer.
Select the messages you want to display from the list on the left side of the interface.
Drag and drop the messages to the right side of the interface to arrange them in the order you want.
Click on \"Play\" to start displaying your messages.
Click on \"Pause\" to pause displaying your messages.
Click on \"Stop\" to stop displaying your messages.
Click on \"Timer\" to set a timer for your messages. ec8f644aee